Free shipping to GER from 25€ Worldwide Shipping from 9,50,-€ 0049 (0) 5261 - 97710

6.00x15" Rear Wheel Conversation Yamaha XVS 1100 Drag Star

Close filters
 
  •  
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
No results were found for the filter!
MB20-3050_1403
Side mount license plate holder Yamaha XVS 650 Drag Star - Classic, Yamaha XVS 1100 Drag Star - Classic TÜV
"Made in Germany"Side mount license plate holder with TÜV Test Report § 19/3forYamaha XVS 650 Drag Star - Classic / 4VR - 4XR - VM02 - VM03 - VM04Yamaha XVS 1100 Drag Star - Classic / VP05 - VP16The side mount license plate holder is supplied pre-assembled with all parts required for assembly.Our side mount license plate holder are made of steel and are available in...
€269.00 *
SON_903
Spoke and Center Wheels
Spoke and Center for Motorrad Burchard Rim Rings and Spoke Sets. For 3.50x16" Rim Ring with Spoke Set 6.00x15" Rim Ring with Spoke Set You send us your original wheel hub and we take over the spoke and centering.
€249.00 *
H68-152
Highway Hawk License plate holder for Cat Ey universal
License plate holder for Cat Ey universal Wide= 12,5 cm High= 6,5 cm Made of stainless steel
€39.00 *
H68-319
Highway Hawk Taillight "Cat Eye" E-Mark
Taillight "Cat Eye" E-Mark Width: 12,5 cm Hight: 6,5 cm
€29.56 *
MB04-1270 4-V_1470
Soziusseat for Motorrad Burchard Tail conversions
Das Soziuspad ist passend für das Heckteil von Motorrad BurchardFür unsere Sitzbänke stehen insgesamt 18 Muster zur Verfügung (siehe Mustertabelle). Die Sitzbänke werden mit allen zur Montage erforderlichen Zubehörteilen und, wenn nötig, mit einer Montageanleitung ausgeliefert. Die Sitzbänke werden von Hand gefertig "Made in Germany". Das Grundblech ist aus Stahl und...
From €204.00 *
SW_3150
Swing arm modification Yamaha XVS 1100 Drag Star
Swing arm modification for Yamaha XVS 1100 Drag Star / VP05 Through the change the installation of a 6.00 x15 " Rim Ring with a 200mm rear wheel is possible. To change, the original swingarm must be sent to us. In addition to the postage costs, no additional costs are incurred. The swingarm is widened by us and provided with a new serial number. The price does not include a...
€595.00 *
600x15FelgenringC_1537
Rim Ring 6.00x15" for rear Yamaha XVS 1100 Drag Star TÜV
Rim Ring 6.00x15 " for rear with TÜV Test Report §19/3 for Yamaha XVS 1100 Drag Star / VP05 For the conversion to a wide rear wheel we offer a 6.00x15" Rim Ring. With the rim ring you can drive a 200mm rear tyre. The rim ring is on the original wheel hub. Please note that you need a new Spoke Set of Motorrad Burchard. The original Spoke Set no longer fits. Additional...
From €699.01 *
MB11-3150V
Fender Struts (1 Set) for Yamaha XVS 1100 Drag Star TÜV
Fender Struts (1 Set) with TÜV Test Reports §19/3 for Yamaha XVS 1100 Drag Star / 4VR - 4XR - VM02 The rear fender struts are attached to the original retaining points from the vehicle frame. In some times, the original rear fender struts must be shortened. The rear fender struts are still approved for the 2-person operation with the use of the 220mm steel flat fender of...
From €379.00 *
MB04-3150_7-V
Motorbike Seat for tail conversion Soloseat for Yamaha XVS 1100 Drag Star
"Made in Germany" The seat fits only on the Motorrad Burchard tail conversion for Yamaha XVS 1100 Drag Star / VP05 For our seats we have 18 different patterns (see sample table). The seats be required with all mounting parts and, if necessary, with an assembly instructions. All designs will be made by order. The delivery will happen within approx. 8-10 days. If you have a...
From €399.00 *
MB98-3150
Spoke Set for 6.00x15" rear wheel Yamaha XVS 1100 Drag Star
Stainless steel Spoke Set for 6.00x15" rear wheelforYamaha XVS 1100 Drag Star / VP05The Spoke Set is used for the conversion to a 6.00 x15" Rim Ring of Motorcycle Burchard on the original wheel hub.If you have any questions about the product, please contact us by phone or mail.
€235.35 *
MB00-3150
Lowering Kits For Shock Absorbers Yamaha XVS 1100 Drag Star TÜV
Shock absorber lowering with TÜV Test Report §19/3 for Yamaha XVS 1100 Drag Star / VP05 By the conversion the motorcycle is lowered by approx. 4,5 cm (measured above the rear wheel centre) The change of the original shock absorbers is a real price alternative to new shock absorbers. The original shock absorbers must be sent to us for conversion. In addition to the postage...
€198.99 *
MB09-6220_1046
Fender Steel "Flat" Style universal
Fender "Flat" Style for rear wheelsMaterial: Steel RawUsed universally for wheel sizes between 15 - 17"Total length is 1210 mmThe following widths are available:200mm - for approx. 170mm - 180mm wide rear wheels220mm - for approx. 200mm wide rear wheelsThe fenders are supplied as universal fenders and are available in various widths. The width is measured from the inside.We...
€198.99 *
Viewed

Go to
Ledrie-Shop

Zum Shop Ledrie

Go to
HH-Shop

Zum Shop Highway Hawk