Spare part suitable for tail light, brake light, turn signal BLAZE:254-300/ 254-301/ 254-302Connections: Black = ground (-) for both functions Yellow = turn signal (+) Orange = driving light (+) Red = brake light (+) ATTENTION: Check the connector color before buying!
Highway Hawk additional bracket for VELONA instruments with Ø60 mm, black.for mounting the HIGHSIDER indicator light unit (360-230 or 360-231) on VELONA speedometers or VELONA tachometers with a diameter of 60 mm.Dimensions width: 57,5 mm height: 65 mm Depth: 35 mm Material thickness: ca.1,5 mm Upper hole spacing of the holder for mounting on the speedometer: approx. 45 mm (center-center) Diameter: 6 mm Hole diameter for mounting the holder: 8 mm, M8 Hole spacing for fixing the indicator light unit to the holder: 15 mm Hole diameter: 3 mmScope of delivery: 1 piece
HIGHSIDER control display instrument chromeAluminum housing, tinted glass, 5 indicators.Optional handlebar clamp: item no. 305-011The indicators at a glance: 2x turn signal High beam Neutral Oil pressureDimensions: Width: 57 mm Height: 17,5 mmDepth: 18 mmConnections: Black cable (ground) + orange cable = turn signal left Black cable (ground) + blue cable = turn signal right Black wire (ground) + yellow wire = high beamsIf neutral or oil pressure is switched negative:Connect gray wire to neutral signal and brown wire to 12V (+). Connect green cable to oil pressure signal and purple cable to 12V (+)If neutral or oil pressure is switched positive: Connect brown wire to neutral signal and gray wire to ground (-).Connect violet cable to oil pressure signal and green cable to ground (-)Scope of delivery: 1 piece
HIGHSIDER control display instrument black.Aluminum housing, tinted glass, 5 indicators.Optional handlebar clamp: item no. 305-011The indicators at a glance: 2x turn signal High beam Neutral Oil pressureDimensions: Width: 57 mm Height: 17,5 mmDepth: 18 mmConnections: Black cable (ground) + orange cable = turn signal left Black cable (ground) + blue cable = turn signal right Black wire (ground) + yellow wire = high beamsIf neutral or oil pressure is switched negative:Connect gray wire to neutral signal and brown wire to 12V (+). Connect green cable to oil pressure signal and purple cable to 12V (+)If neutral or oil pressure is switched positive: Connect brown wire to neutral signal and gray wire to ground (-).Connect violet cable to oil pressure signal and green cable to ground (-)Scope of delivery: 1 piece
HIGHSIDER STRIPE aluminum housing chromefor LED tail light or turn signal of the Highsider seriesThe housing can be screwed or glued. On the bottom of the housing are 2 x M4- screw holes in a hole spacing of 32 mm (center-center).Dimensions:Width: 57.5 mm Height: 11,2 mm Depth: 26,5 mm Depth without screen: 20,5 mmScope of delivery: 1 piece
Highway Hawk HIGHSIDER STRIPE aluminum housing blackfor LED tail light or turn signal of the Highsider seriesThe housing can be screwed or glued. On the bottom of the housing are 2 x M4- screw holes in a hole spacing of 32 mm (center-center).Dimensions:Width: 57.5 mm Height: 11,2 mm Depth: 26,5 mm Depth without screen: 20,5 mmScope of delivery: 1 piece
Highway Hawk HIGHSIDER housing for COLORADOLED turn signals and taillights Housing made of black aluminum, round shape.Dimensions: Diameter, outside: 43 mm Diameter, inside: 40 mm Height, total: 14 mm Thickness of the base plate: approx. 3 mmScope of delivery: 1 pair including 4 x threaded bolts and 4 x adhesive strips.Notes: Matching LED tail light/turn signal unit, item no.: 254-205. Matching LED turn signal unit, item no.: 203-205.
HIGHSIDER CNC push button switch with 2 buttonsblack anodized aluminum housingSuitable for 7/8 inch and 1 inch handlebars.Universal use for controlling load relays, switching various modes on speedometers, etc.Dimensionswidth: 12 mm Depth: 40 mm Push button Ø: 4,5 mm Rubber: 75 mm x 0,3 mm Hexagon socket screws: M3 x 12 mm Cable length: 570 mmAssignment: -Button A : green + red (from below) -button B : green + brown -green = input signalScope of delivery: 1 piece push button 1 x rubber 2 x screwsNotes: NOT for currents over 0.05 amps. At 12 Volt max. 0,6 Watt!
Highway Hawk HIGHSIDER H4 insert - E approved. 12V 60/55Wrectangular, clear glass, with parking lightSuitable for the HIGHSIDER headlight series OREGON with part no. 223-055 / 223-056 / 223-057 / 223-058.Dimensions:A: 180 x 90 mmGA: 172 x 85 mm I: 165 x 80 mm R: 10 mm T: max. 90 mmIlluminant: H4, 12 V 60/55WConnections: Black cable = ground (-) Yellow cable = low beam (+)Blue cable = high beam (+)Connections parking light function: Black wire = ground (-)Green cable = parking light (+)Scope of delivery: 1 piece
HIGHSIDER replacement sealing rubber for headlights IOWA.This article replaces the sealing rubber between frame and housing for the HIGHSIDER headlights item no. 223-060 and 223-062.Scope of delivery: 1 piece
HIGHSIDER Replacement Frame for Headlight "IOWA".Chrome-plated metal frame suitable for HIGHSIDER headlights, item no. 223-060.Scope of delivery: 1 piece
HIGHSIDER DRL CONTROL- BOX CB1Daytime running light control box for vehicles without light switchThe BOX is suitable for LED and conventional headlights and is installed between the main headlight with integrated or separate daytime running light and the vehicle electrical system.Dimensions length: 48 mm width: 28 mm Height: 14 mmAssignment: IN (vehicle electrics): Yellow = high beam (+) Blue = low beam (+) ON / OFF switch between White = parking light (+) Red = Ignition 15 (+) Black = Ground (-)OUT (headlight) Yellow = High beam (+) Blue = Low beam (+) Black = Ground (-)To the daytime running light: White = parking light (+) Red = Daytime running light (+)Scope of delivery: 1 pieceNote: A separate ON and OFF switch is also required.
HIGHSIDER Digital flasher relay PW-NANO, 8-18 Voltfor turn signals from 0,1-21 Watt (max. 42 Watt per side)Dimensions: Length: 15 mm width: 5 mm Height: 6 mmTechnical specifications: Supply voltage: 8 V - 18 V Load range: 0.1 W - 42 W per side Simple connections via 2 wires: Connect red cable = 12 V (+) with terminal 49, it is recommended to connect a 10 A fuse in front of it Black cable = connect ground (-) in series to turn signal switch with terminal 49aScope of delivery: 1 piece
HIGHSIDER aluminum turn signal mounting plates blackfor rearfor BMW RnineTMade of aluminum / blackallows the mounting of various accessory turn signals instead of the original turn signals.Scope of delivery: 1 set
HIGHSIDER aluminum turn signal mounting plates blackfor frontfor BMW RnineTMade of aluminum / blackallows the mounting of various accessory turn signals instead of the original turn signals.Scope of delivery: 1 set
HIGHSIDER aluminum turn signal holder, black, for CNC aluminum standpipe clamps.The turn signal holder is screwed to the CNC aluminum standpipe clamps. Can also be used universally.Dimensions:Width: 42 mm Without mounting: 32 mm Height: 15 mm Thickness: 1 mm Mounting hole receptacle: Ø 5 mm Mounting hole turn signal: Ø 8 mmScope of delivery: 1 pairOptionally orderable: Matching CNC standpipe clamps: Part no. 207-402 to 207-419