Top seller
No results were found for the filter!
Handlebar bar ends chrome for 25,40 mm (1'') handlebar Made of chromed- anolized Billet Aluminum Included in delivery: 2 pieces
€22.97 *
Reduction sleeves for handlebars From 1" to 7/8 " (22mm) Material: Steel galvanized Included: 4 x Half reduction sleeves
€10.70 *
Handlebar bar ends dull black for 25,40 mm (1'') handlebar Made of Billet Aluminum with a powder coat finish Included in delivery: 2 pieces
€22.97 *
Handlebar "Anfora 30" - "1" (25,4 mm) with TÜV Test Report §19/3 Wide: 740 mm High: 300 mm Depth: 125 mm clamping width: 140mm Handlebarwidth lower edge: approx. 260mm Material: Steel Finish: black dull 3 holes each with 1 x slot between the risers, 1 x slot in the area of the handles With TÜV Test Report §19/3 Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S,...
€66.46 *
Handlebar "Street Low" - "1" (25,4 mm) with TÜV Test Report §19/3 Wide: 820 mm High: 250 mm Depth: 170 mm Clamping wide: 220 mm Material: Steel Finish: Chrome 3 holes each with 1 x slot between the risers, 1 x slot in the area of the handles With TÜV Test Report §19/3 Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S, Spirit / RC53 Honda / VT 750S / RC58 Suzuki...
€113.35 *
Handlebar "Street Low" - "7/8" (22 mm) with TÜV Test Report §19/3 Wide: 820 mm Height: 250 mm Depth: 170 mm Clamping wide: 220 mm Material: Steel Finish: Chrome With TÜV Test Report §19/3 Yamaha XV 1000 Virago / 2AE For vehicles which are not listed in the usage list, the following advice is available: If the special handlebar is mounted on a vehicle which is not listed...
€71.44 *
Handlebar "Bad Drag" - "1" (25,4 mm) with TÜV Test Report §19/3 Wide: 840 mm High:175mm Depth: 160 mm Clamping width: 140 mm Handlebarwidth lower edge: approx. 200mm Material: Steel Finish: black dull 3 holes each with 1 x slot between the risers, 1 x slot in the area of the handles With TÜV Test Report §19/3 Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S,...
€66.46 *
Handlebar "Bad Hawk" - "1" (25,4 mm) with TÜV Test Report §19/3 Wide: 825 mm High: 335 mm Depth: 240 mm Clamping wide: 165 mm Handlebarwidth lower edge: approx. 305mm Material: Steel Finish: dull black 3 holes each with 1 x slot between the risers, 1 x slot in the area of the handles With TÜV Test Report §19/3 Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S,...
€70.95 *
Handlebar "Corsa" - "1" (25,4 mm) with TÜV Test Report §19/3 Wide: 760 mm High: 80mm Depth: 90 mm Clamping width: 120 mm Handlebarwidth lower edge: approx. 170mm Material: Steel Finish: dull black 3 holes each with 1 x slot between the risers, 1 x slot in the area of the handles With TÜV Test Report §19/3 Harley Davidson XL883, XL883R, XL1200, XL1200C, XL1200S, XLH883,...
€56.74 *
Handlebar "Bad Hawk" - "1" (25,4 mm) with TÜV Test Report §19/3 Wide: 800 mm High: 240 mm Depth: 180 mm Clamping wide: 160 mm Handlebar width lower edge: approx. 220mm Material: Steel Finish: dull black 3 holes each with 1 x slot between the risers, 1 x slot in the area of the handles With TÜV Test Report §19/3 Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S,...
€87.29 *
Handlebar "Anfora 35" - "1" (25,4 mm) with TÜV Test Report §19/3 Wide: 740 mm High: 350 mm Depth: 125 mm Clamping width: 140 mm Handlebarwidth lower edge: approx. 240mm Material: Steel Finish: black dull 3 holes each with 1 x slot between the risers, 1 x slot in the area of the handles With TÜV Test Report §19/3 Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S,...
€66.46 *
Handlebar "Beachbar" - "1" (25,4 mm) with TÜV Test Report §19/3 Wide: 940 mm High: 80 mm Depth: 250 mm Clamping wide: 160 mm Handlebar width lower edge: approx. 220mm Material: Steel Finish: Chrome 3 holes each with 1 x slot between the risers, 1 x slot in the area of the handles With TÜV Test Report §19/3 Honda / VT750 C, -CS, C4, C5, C6 / RC50 Honda / VT750 C2, -C2S,...
€101.17 *
Viewed