Lowering Kits For Shock Absorbers Yamaha XVS 650 Drag Star - Classic TÜV

Shock absorber lowering with TÜV Test Report §19/3 for Yamaha XVS 650 Drag Star / 4VR - 4XR Yamaha XVS 650 Drag Star Classic / VM02 - VM03 - VM04 By the conversion the motorcycle is lowered by approx. 4,0 cm (measured above the rear wheel centre) Material Steel chrome With TÜV Test Report 19/3 (TÜV Nord) for the Honda VT 600 Shadow The lowering kit is delivered with all parts required for assembly. Attention to the conversion you need a spring tensioner Mounting NOTE: 1. Squeeze Spring with spring tensioner 2. Unscrew the shock absorber head 3. Relieve the spring tension and remove the spring 4. Push the large ring over shock absorber housing 5. Remove the old stop Bush from the piston rod, slide the supplied plastic bushing over the piston rod 6. Push the spring and press it together with the spring tensioner 7. Screw new Shock absorber head, relieve spring 8. Take the Bush from the old shock absorber head and re-press into the new one You can also let us done the shock absorber conversion. The original shock absorber must be sent to us for conversion. In addition, please order the service "shock absorber lowering for MB00-1080-MB00-1081-MB00-3050-H472-0065". The shock absorbers are lowered by us.